Share:
NIPPON PAINT Zinc Phosphate Primer FD
Rust inhibiting primer for iron & steel
Zinc Phosphate Primer FD is a rust-inhibiting primer designed for use on iron and steel surfaces. It is recommended for protecting these surfaces under non-immersion conditions, providing a reliable base for further coatings.
-
Anti-rust properties
- Fast dry
- Available in Reddish Brown, Grey Green and Light Grey Colour
- Solvent-based topcoats are to be used with solvent-based primers and sealers
Product Overview
Exterior, Interior, Protective Coating
Solvent-based
Low Gloss
Iron, Steel
1 - 2 Coats
Touch Dry: Approximately 15 Minutes
Hard Dry: 4 Hours
Brush/Roller: Max 5% General Purpose Thinner
Conventional Air Spray: 15 - 20% General Purpose Thinner
Airless Spray: Max 5% General Purpose Thinner
Minimum 8 Hours
18.3 m² per litre per coat: dry film thickness of 30 microns
12.2 m² per litre per coat: dry film thickness of 45 microns
Brush, Roller, Conventional Air Spray, Airless Spray
Inquiry - NIPPON PAINT Zinc Phosphate Primer FD
