Share:
NIPPON PAINT Zinc Phosphate Primer FD
Rust inhibiting primer for iron & steel
Zinc Phosphate Primer FD is a rust-inhibiting primer designed for use on iron and steel surfaces. It is recommended for protecting these surfaces under non-immersion conditions, providing a reliable base for further coatings.
- Anti-rust properties
- Fast dry
- Available in Reddish Brown, Grey Green and Light Grey Colour
- Solvent-based topcoats are to be used with solvent-based primers and sealers
Product Overview
Product Type
Paint Type
Finishing
Recommended Number of Coats
1 - 2 Coats
Drying Time
Touch Dry:Approximately 15 Minutes
Hard Dry:4 Hours
Methods of Thinning
Brush/Roller: Maximum 5% of Nippon Paint General Purpose Thinner
Conventional Air Spray: 15 - 20% of Nippon Paint General Purpose Thinner
Airless Spray: Maximum 5% of Nippon Paint General Purpose Thinner
Recoating Time
Minimum 8 Hours
Coverage
18.3 m2 per litre per coat: dry film thickness of 30 microns
12.2 m2 per litre per coat: dry film thickness of 45 microns
Method of Application
Brush, Roller, Conventional Air Spray, Airless Spray
Inquiry - NIPPON PAINT Zinc Phosphate Primer FD
